About This Glossary

Live events borrow words from theatre, broadcast and sport, and the same thing can have three names. This glossary covers the terms you will hear on comms and in production meetings, with plain definitions. For the documents themselves, see the run of show template and cue sheet template.

Live Event Production Terms A–Z

A1
The lead audio engineer, who mixes the show at front of house or in the control room.
A2
The second audio engineer, who handles microphones, stage audio and fixes away from the console.
Back time
Working backwards from a hard out to find when each segment must start so the show ends on time.
Bed
Music played under speech or action, such as an opening bed under the PA announcer.
Call sheet
The crew schedule for a day: call times, locations and contacts. Not the same as a cue sheet.
Comms
The intercom system the crew talks on, usually headsets on separate channels for calling, video and audio.
Cue
A single change in the show, such as a lighting look, a sound or a video roll, triggered by the caller or by time.
Cue light
A light at an operator or backstage position that the caller switches on for standby and off for GO, used where talking is not possible.
Cue sheet
The numbered list of cues for a show or a department, with triggers and actions. See the free cue sheet template.
Cue to cue (Q2Q)
A technical rehearsal that jumps from one cue to the next, skipping the material in between, to rehearse every transition.
Dark
A day with no show, or a position or screen that is switched off.
FOH
Front of house: the audience side of the venue, or the audio and lighting position there.
Front time
The planned clock time a segment should start, compared with the actual time to see if the show is running heavy or light.
GO
The word that executes a cue. Said once, after the department and cue number.
Hard out
A fixed end time that cannot move, such as a broadcast window or a venue curfew.
Heavy / light
Running over (heavy) or under (light) the planned time.
Hold
A call to stop and wait. Everything stays where it is until the caller resumes.
House lights
The lights over the audience. “House out” means turning them off.
LD
Lighting designer, who designs the looks. The lighting operator runs them from the console.
Lower third
A graphic in the bottom part of the screen showing a name, title or score.
PA announcer
The in-venue voice who reads scripted announcements, introductions and sponsor reads.
Preset
The state of lighting, video and audio when the audience arrives, before the show starts.
Prompter
A screen showing the script to talent so they can read while facing the audience or camera.
Roll-in
A pre-recorded video played into the show.
Rundown
The timed running order of a show. Common in broadcast; called a run of show in events and sports.
Run of show
The minute-by-minute plan for a live event: every segment, its timing, its owner and what each department does. See the free run of show template.
Run sheet
Another name for a run of show, common in Australia, the UK and event planning.
Show caller
The person who calls every cue, putting departments on standby and saying GO.
Standby
The call that warns an operator their cue is next. They reply “standing by”.
Sting
A short burst of music or sound that punctuates a moment, such as a goal or an entrance.
T-minus (T–)
Countdown time before the start of the show or game, such as T–05:00.
TD
Technical director, who switches cameras and sources in the control room, and in some productions leads the technical crew.
Tech rehearsal
A rehearsal focused on technical cues rather than performance.
V1
The lead video engineer or playback operator, responsible for what appears on screens.
Walk-in
The period as the audience arrives, usually with music and holding graphics.

Questions

What is an A1 in audio?

The A1 is the lead audio engineer who mixes the show. The A2 supports them with microphones and stage audio.

What does V1 mean in production?

V1 is the lead video engineer or playback operator responsible for what appears on the screens.

What is a cue light?

A cue light is a light at an operator or backstage position that the caller switches on for standby and off for GO, used where talking on comms is not possible.

What does running heavy mean?

Running heavy means the show is behind schedule and over its planned time. Running light means it is ahead.